Electronic Insulation Thermal Pad
Best Price For Electronic Insulation Thermal Pad, Thermal Pad 0.8w/m-k
We're here to help
Easy ways to get the answers you need.
Contact Us
Details
Electronic Insulation Thermal Pad, Thermal Pad 0.8w/m-k
TP080 series thermal pad is naturally sticky silicone based electrical insulation heat conductive material which is used to fill air gaps between heat generating components and heat sinks.
Due to its low hardness and great compressibility, TP080 thermal pad works as the perfect gap filler and bridges uneven surface and gaps without any problems.
Thermal conductivity: 0.8 W/m-K
Cost effective
High compressibility
TP080 series thermal pad is naturally sticky silicone based electrical insulation heat conductive material which is used to fill air gaps between heat generating components and heat sinks.
Due to its low hardness and great compressibility, TP080 thermal pad works as the perfect gap filler and bridges uneven surface and gaps without any problems.
Electronic Insulation Thermal Pad Main Features:
Thermal conductivity: 0.8 W/m-K
Cost effective
High compressibility
Naturally tacky for easy assembly
Electrically insulating
Enhanced puncture, shear, and tear resistance
Electronic Insulation Thermal Pad Applications:
LED lighting
Power conversion / supply
Heat generating module
Electric vehicle battery
Semiconductor, IC, CPU.MOS and heatsink
Area where heat needs to be transferred to a frame, chassis, or other type of heat spreader
Properties | Units | TP080 | Test Method |
Main Composition | --- | Silicone & Ceramic filled | --- |
Color | --- | Gray/Blue | Visual |
Thickness Range | mm | 0.5~12.0 | --- |
Hardness | Shore C | 18 or 35 | ASTM D2240 |
Density | g/cc | 2 | ASTM D792 |
Tensile Strength | KN/m | 1.3 | ASTM D412 |
Elongation | % | 1.35 | ASTM D412 |
Continuous Use Temp | ℃ | -40 to 200 | EN344 |
Breakdown Voltage | Kv/mm | ≥4.0 | ASTM D149 |
Volume Impedance | ohm-cm | 1.7*1016 | ASTM D257 |
Dielectric Constant | 1MHz | 4.51 | ASTM D150 |
Weight Daminify | --- | ≤1﹪ | @150℃ 240H |
Flame Rating | --- | V0 | UL 94 |
Thermal Conductivity | W/m.k | 0.8 | ASTM D5470 |
SGS, RoHS, REACH | --- | Compliance | --- |
Configurations:
Standard size 200mm x 400mm ; 300mm x 300mm ; die cut parts available ; roll form avilable( length 50M)
Available with 3M adhesive on reinforced side.